
- Stock: In Stock
- Brand: Unbranded
- Model: 1-CHIP0953
- SKU: 1-CHIP0953
Realtime Stock
Controller IC Chip - RT8241AZQW RT8241A RT8241AZQW ( 30* ) QFN 12 Chip for laptop- Integrated portable calculator chip(SKU.1-CHIP0953)
The RT8241 PWM controller provides high efficiency, excellent transient response, and high DC output accuracy needed for stepping down high voltage batteries to generate low voltage CPU core, I/O, and chipset RAM supplies in notebook computers. The RT8241 supports on chip voltage programming function between 0.675V and 0.9V by controlling GX digital inputs. The constant-on-time PWM control scheme handles wide input/output voltage ratios with ease and provides 100ns “instant-on†response to load transients while maintaining a relatively constant switching frequency. The RT8241 achieves high efficiency at a reduced cost by eliminating the current-sense resistor found in traditional current-mode PWMs. Efficiency is further enhanced by its ability to drive very large synchronous rectifier MOSFETs and enter diode emulation mode at light load condition. The buck conversion allows this device to directly step down high voltage batteries at the highest possible efficiency. The RT8241 is intended for CPU core, chipset, DRAM, or other low voltage supplies as low as 0.675V. The RT8241 is available in a WQFN-12L 2x2 package.
Meet Intel VCCSA Voltage Slew Rate z Built-in 1% Reference Voltage z 2-Bit Programmable Output Voltage with Integrated Transition Support z Quick Load-Step Response within 100ns z 4700ppm/°C Programmable Current Limit by Low Side RDS(ON) Sensing z 4.5V to 26V Battery Input Range z Internal Ramp Current Limit Soft-Start Control z Drives Large Synchronous Rectifier FETs z Integrated Boost Switch z Over/Under Voltage Protection z Thermal Shutdown z Power Good Indicator z RoHS Compliant and Halogen Free
Please check before you buy it
Please check the IC Number and match with your existing Product.
When you receive before using it, please confirm the chip you received is brand new as described,if you suspect the chip is not new or not as described.
Please don't use it and contact us immediately.
Please make sure you have advanced soldering skill to solder the chips that you will order.
Once it has been used, no return will be accepted.