Controller IC Chip - RT8231AGQW RT8231A ( 24=** ) QFN20 Chip for laptop - Integrated Laptop Chip (Code 1-CHIP0948)

Controller IC Chip - RT8231AGQW RT8231A ( 24=** ) QFN20 Chip for laptop- Integrated portable calculator chip(SKU.1-CHIP0948)

The RT8231A/B provides a complete power supply forDDR2/DDR3/DDR3L/LPDDR3/DDR4/LPDDR4 memorysystems. It integrates a synchronous PWM Buckcontroller with a 1.5A sink/source tracking linear regulatorand buffered low noise reference.The PWM controller provides the low quiescent current,high efficiency, excellent transient response, and high DCoutput accuracy needed for stepping down high-voltagebatteries to generate low-voltage chipset RAM suppliesin notebook computers. The constant on-time PWMcontrol scheme handles wide input/output voltage ratioswith ease and provides 100ns “instant-on” response toload transients while maintaining a relatively constantswitching frequency.The RT8231A/B achieves high efficiency at a reduced costby eliminating the current-sense resistor found intraditional current mode PWMs. Efficiency is furtherenhanced by its ability to drive very large synchronousrectifier MOSFETs. The Buck conversion allows this deviceto directly step down high-voltage batteries for the highestpossible efficiency.The 1.5A sink/source LDO maintains fast transientresponse only requiring a 10mF ceramic output capacitor.In addition, the LDO supply input is available externallyto significantly reduce the total power losses. The RT8231A/B supports all of the sleep state controls placingVTT at high-Z in S3 and discharging VDDQ, VTT andVTTREF (soft-off) in S4/S5.The RT8231A/B provides protections including OVP, UVP,and thermal shutdown. The RT8231A/B is available in theWQFN-20L 3x3 package.

PWM Controller Adjustable Current Limit with Low-Side RDS(ON)Sensing Low Quiescent Supply Current Quick Load-Step Response within 100ns 1% VVDDQ Accuracy Over Line and Load Adjustable 0.675V to 3.3V Output Range for 1.8V(DDR2), 1.5V (DDR3), 1.35V (DDR3L), 1.2V (LPDDR3),1.2V (DDR4) and 1.1V (LPDDR4) 4.5V to 26V Battery Input Range Resistor Adjustable Frequency Over-/Under-Voltage Protection Internal Voltage Ramp Soft-Start Drives Large Synchronous Rectifier MOSFETs Power Good Indicator1.5A LDO (VTT), Buffered Reference (VTTREF) Capable to Sink and Source Up to 1.5A LDO Input Available to Optimize Power Losses Requires Only 10μμμμmF Ceramic Output Capacitor Integrated Divider Tracks 1/2 VDDQ for both VTTand VTTREF Accuracy ±±±±±20mV for both VTTREF and VTT Supports High-Z in S3 and Soft-Off in S4/S5RoHS Compliant and Halogen Free

Please check before you buy it

Please check the IC Number and match with your existing Product.

When you receive before using it, please confirm the chip you received is brand new as described,if you suspect the chip is not new or not as described.

Please don't use it and contact us immediately.

Please make sure you have advanced soldering skill to solder the chips that you will order.

Once it has been used, no return will be accepted.