
- Stock: In Stock
- Brand: Unbranded
- Model: 1-CHIP0995
- SKU: 1-CHIP0995
Realtime Stock
Controller IC Chip - MOSFET RT9619A chip for laptop- Integrated portable calculator chip(SKU.1-CHIP0995)
Synchronous-Rectified Buck MOSFET Drivers
The RT9619/A is a high frequency, dual MOSFET driver specifically designed to drive two power N-Channel MOSFETs in a synchronous-rectified buck converter topology. This driver combined with Richtek's series of Multi-Phase Buck PWM controller form a complete corevoltage regulator solution for advanced micro-processors. The RT9619/A drives both the lower/upper gate in a synchronous-rectifier bridge with 12V. This drive-voltage flexibility provides the advantage of optimizing applications involving trade-offs between switching losses and conduction losses. RT9619A has longer UGATE/LGATE deadtime which can drive the MOSFETs with large gate RC value, avoiding the shoot-through phenomenon. RT9619 is targeted to drive low gate RC MOSFETs and performs better efficiency. The output drivers in the RT9619/A can efficiently switch power MOSFETs at frequency up to 500kHz. Switching frequency above 500kHz has to take into account the thermal dissipation of SOP-8 package. RT9619/A is capable to drive a 3nF load with a 30ns rise time. RT9619/A implements bootstrapping on the upper gate with an external capacitor and an embedded diode. This reduces implementation complexity and allows the use of higher performance, cost effective N-Channel MOSFETs. Adaptive shoot-through protection is integrated to prevent both MOSFETs from conducting simultaneously.
z Drives Two N-Channel MOSFETs z Adaptive Shoot-Through Protection z Embedded Boot Strapped Diode z Supports High Switching Frequency z Fast Output Rise Time z Small SOP-8 Package z Tri-State Input for Bridge Shutdown z Supply Under Voltage Protection z Upper MOSFET Direct Shorted Protection z RoHS Compliant and 100% Lead (Pb)-Free
Please check the IC Number and match with your existing Product.
When you receive before using it.
Please confirm the chip you received is brand new as described,if you suspect the chip is not new or not as described. Please don't use it and contact us immediately.
Please make sure you have advanced soldering skill to solder the chips that you will order.
Once it has been used, no return will be accepted.