
- Stock: In Stock
- Brand: Unbranded
- Model: 1-CHIP0531
- SKU: 1-CHIP0531
Realtime Stock
Controller IC Chip - MOSFET ISL88732 ISL88732HRZ QFN-28 chip for laptop- Integrated portable calculator chip(SKU.1-CHIP0531)
SMBus Level 2 Battery Charger with Boost Mode
The ISL88732 is a highly integrated Lithium-ion battery charger controller, programmable over the SMBus system management bus (SMBus). The ISL88732 is intended to be used in a smart battery charger (SBC) within a smart battery system (SBS) that throttles the charge power such that the current from the AC-adapter is automatically limited. High efficiency is achieved with a DC/DC synchronous-rectifier buck converter, equipped with diode emulation for enhanced light load efficiency. The ISL88732 charges one to four Lithium-ion series cells, and delivers up to 8A charge current. Integrated MOSFET drivers and bootstrap diode result in fewer components and smaller implementation area. Low offset current-sense amplifiers provide high accuracy with 10mï— sense resistors. The ISL88732 provides 0.5% end-of-charge battery voltage accuracy.The ISL88732 is available in a small 5mmx5mm 28 Ld Thin (0.8mm) QFN package.
• Boost Mode to support Intel “Turbo Modeâ€â€¢ Pin compatible with ISL88731• Over-temp and overcurrent protection• 0.5% battery voltage accuracy • 4% adapter current limit accuracy• 3% charge current accuracy• SMBus 2-wire serial interface• Charge current limited by SMBus DAC OR analog voltage at the CCLIM pin• Turbo-boost discharge current limit can be set to 3.3x, 4.85x, 6.37x or 9.31x the charge current limit by SMBus command• Monitor outputs- Adapter current (3% accuracy)- Adapter overcurrent ALERT#. Threshold set by resistor divider- AC-adapter detection• 11-bit battery voltage setting• 6-bit charge current/adapter current setting• 8A maximum battery charger current• 11A maximum adapter current• +8V to +22V adapter voltage range • Pb-free (RoHS compliant)
Please check the IC Number and match with your existing Product.
When you receive before using it.
Please confirm the chip you received is brand new as described,if you suspect the chip is not new or not as described. Please don't use it and contact us immediately.
Please make sure you have advanced soldering skill to solder the chips that you will order.
Once it has been used, no return will be accepted.