
- Stock: In Stock
- Brand: Unbranded
- Model: 1-CHIP0341
- SKU: 1-CHIP0341
Realtime Stock
Controller IC Chip - MOFSET BQ24741 BQ24741RHDR BQ24741 chip for laptop- Integrated portable calculator chip(SKU.1-CHIP0341)
Li-Ion or Li-Polymer Battery Charger with Low lq and Accurate Trickle Charge
The bq24741 is a high-efficiency, synchronous battery charger with integrated compensation, offering low component count for space-constrained Li-ion or Li-polymer battery charging applications. Ratiometric charge current and voltage programming allows high regulation accuracies, and can be either hardwired with resistors or programmed by the system power-management microcontroller using a DAC or GPIOs. The bq24741 charges two, three, or four series Li+ cells, supporting up to 10 A of charge current, and is available in a 28-pin, 5x5-mm2 thin QFN package.
NMOS-NMOS Synchronous Buck Converter Resistor-Programmable Switching Frequency between 300 kHz and 800 kHz 8 V-24 V Input Voltage Operation Range Cells Pin Support Two to Four Li-Ion Cells up to 18 V Battery Voltage Analog Inputs with Ratiometric Programming via Resistors or DACIGPIO — Charge Voltage (4-4.512 V/cell) — Charge Current (up to 10 A) — Adapter Current Limit for DPM High-Accuracy Voltage and Current Regulation — ±0.5% Charge Voltage Accuracy — ±3% Charge Current Accuracy — ±3% Adapter Current Accuracy — ±2% Input Current Sense Amp Accuracy 150 mA Trickle-charge Current with ±33% Accuracy Down to Zero Battery Voltage Safety Protection — Input Overvoltage Protection — Battery Overvoltage Protection — Charger Overcurrent Protection — Thermal Shutdown Protection Status and Monitoring Outputs — Adapter Present Indicator — Programmable Input Power Detect with Adjustable Threshold — Dynamic Power Management (DPM) with Status Indicator — Current Drawn from Input Source Charge Enable Pin Internal Soft-Start Internal Loop Compensation 25 ns Minimum Driver Dead-Time and 99.5% Maximum Effective Duty Cycle 28-pin, 5x5-mm2 QFN package Energy Star Low Iq — < 10 xA Off-State Battery Discharge Current — < 1.5 mA Off-State Input Quiescent Current
Please check the model number in our description as well as our photo..
Please check the IC Number and match with your existing Product.
When you receive before using it.
Please confirm the chip you received is brand new as described,if you suspect the chip is not new or not as described. Please don't use it and contact us immediately.
Please make sure you have advanced soldering skill to solder the chips that you will order.
Once it has been used, no return will be accepted.