Controller IC Chip - Synchronous Buck Controller MOSFET APW8813A APW8813 chip for laptop - Integrated Laptop Chip (Code 1-CHIP0307)

Controller IC Chip - Synchronous Buck Controller MOSFET APW8813A APW8813 chip for laptop- Integrated portable calculator chip(SKU.1-CHIP0307)

The APW8813/A integrates a synchronous buck PWM controller to generate VDDQ. a sourcing and sinking LDO linear regulator to generate VTT. It provides a complete power supply for DDR2 and DDR3 memory system. It offers the lowest total solution cost in system where space is at a premium. The APW8813/A provides excellent transient response and accurate DC voltage output in either PFM or PWM Mode. In Pulse Frequency Mode (PFM). the APW8813/A provides very high efficiency over light to heavy loads with loading-modulated switching frequencies. On TQFN4x4- 24A package. the Forced PWM Mode works nearly at con-stant frequency for low-noise requirements. The APW8813/A is equipped with accurate current-limit, output under-voltage. and output over-voltage protections. A Power-On-Reset function monitors the voltage on Vec prevents wrong operation during power on. The LDO is designed to provide a regulated voltage with bi-directional output current for DDR-SDRAM termination. The device integrates two power transistors to source or sink current up to 1.5A. It also incorporates current-limit and thermal shutdown protection. The output voltage of LDO tracks the voltage at VTTREF pin. An internal resistor divider is used to provide a half voltage of VDDQ for VTTREF and VTT Voltage. The VTT output voltage is only requiring 20xF of ceramic output capacitance for stability and fast transient response. The S3 and S5 pins provide the sleep state for VTT (S3 state) and suspend state (S4/S5 state) for device. when S5 and S3 are both pulled low the device provides the soft-off for VTT and VTTREF. The APW8813/A is available in 4mmx4mm 24-pin TQFN package, and the APW8813A is available in 3mmx3mm 20-pin TQFN package.

High Input Voltages Range from 3V to 28V Input Power Provide 1.8V (DDR2), 1.5V (DDR3) or Adjustable Output Voltage from 0.75V to 5.5V - ±1% Accuracy Over-Temperature Integrated MOSFET Drivers and Bootstrap Diode Excellent Line and Load Transient Responses PFM Mode for Increased Light Load Efficiency Constant-On-Time Controller Scheme - Switching Frequency Compensation for PWM Mode - Adjustable Switching Frequency from 100kHz to 550kHz in PWM Mode with DC Output Current Integrated MOSFET Drivers and Bootstrap Diode S3 and S5 Pins Control The Device in SO. SI or 54155 State Power Good Monitoring 70% Under-Voltage Protection (UVP) 125% Over-Voltage Protection (OVP) Adjustable Current-Limit Protection - Using Sense Low-Side MOSFET ifit LDO Section (VII) Souring or Sinking Current up to 1.5A Fast Transient Response for Output Voltage Output Ceramic Capacitors Support at Least 10xF MLCC VII and VTTREF Track at Half the VDDQSNS by Internal Divider ±20mV Accuracy for VTT and VTTREF Independent Over-Current-Limit (OCL) Thermal Shutdown Protection QFN-24 4mmx4mm Thin Package (TQFN4x4-24A) for APW8813 and QFN-20 3mmx3mm Thin Package (TQFN3x3-20) for APW8813A Lead Free and Green Devices Available

Please check the model number in our description as well as our photo..

Please check the IC Number and match with your existing Product.

When you receive before using it.

Please confirm the chip you received is brand new as described,if you suspect the chip is not new or not as described. Please don't use it and contact us immediately.

Please make sure you have advanced soldering skill to solder the chips that you will order.

Once it has been used, no return will be accepted.