Controller IC Chip - MOSFET ISL6232C ISL6232CAZ ISL6232 chip for laptop - Integrated Laptop Chip (Code 1-CHIP0498)

Controller IC Chip - MOSFET ISL6232C ISL6232CAZ ISL6232 chip for laptop- Integrated portable calculator chip(SKU.1-CHIP0498)

High Efficiency System Power Supply Controller for Notebook Computers

The ISL6232 is a high efficiency, quad output controller optimized for converting battery, wall adapter or network DC input voltage into system supply voltages required for portable applications. The ISL6232 includes two PWM controllers generating 0.8V to 5.5V, or fixed 5V and 3.3V outputs. It also features 5V and 3.3V always linear regulators with up to 100mA output current.ISL6232 uses constant frequency current mode PWM control with out-of-phase operation for reducing the input ripple current and the ESR requirement of the input capacitors. Over 95% efficiency is achieved through synchronous rectification and dual PWM/Skip mode architecture. High light load efficiency with skip mode extends the battery life in system standby or shutdown mode. The 5V and 3.3V always linear regulators take their inputs from battery or AC-adapter; and, to further improve efficiency, their outputs are switched to the 5V or 3.3V outputs from switching regulators when 5V or 3.3V is available. Ultrasonic pulse skipping mode maintains switching frequency above 25kHz to eliminate the audio noise for high light load efficiency, and fixed frequency PWM operation mode reduces the RF interference in sensitive applications. External loop compensation is used to optimize the transient response with optimized external components. An accurate current sensing resistor in series with an output inductor, or DC resistance of the inductor is used to sense the output current of the current ramp signal, and overcurrent protection. A peak current detecting scheme is used for overcurrent protection and to prevent the inductor from saturation.The ISL6232 has internal soft-start to control the inrush current. The soft-stop feature avoids negative output voltage for undervoltage protection, overcurrent protection, and shutdown by discharging output through an internal switch, and by damping the inductor current. The ISL6232 also features overvoltage protection, power-up sequences, power good output, and thermal shutdown. It has quiescent power dissipation as low as 3.5mW.

• Supply Voltage Range: 5.5V to 25V• 3.3V and 5V Fixed or Adjustable Outputs from 0.8V to 5.5V• 5V, 3.3V/100mA Always Linear Regulators• Out-of-Phase Operation Reduces the ESR Requirement of the Input Capacitors• ±1.5% Output Voltage Accuracy Over Temperature• Fixed 300kHz Current Mode Control Architecture• Accurate Current Sensing or DCR Current Sensing• Internal Soft-Start and Soft-Stop Output Discharge• Selectable Power-up Sequence• Selectable Forced PWM, Pulse Skipping, and Ultrasonic Pulse Skipping Mode (25kHz min)• Peak Overcurrent Limit Prevents Inductor Saturation• Overvoltage Protection, Undervoltage Shutdown• Power Good Output• Thermal shutdown• 5mA Shutdown Current• Integrated Bootstrap Schottky Diodes• 3.5mW Quiescent Power Dissipation• Pb-Free Available (RoHS Compliant)

Please check the IC Number and match with your existing Product.

When you receive before using it.

Please confirm the chip you received is brand new as described,if you suspect the chip is not new or not as described. Please don't use it and contact us immediately.

Please make sure you have advanced soldering skill to solder the chips that you will order.

Once it has been used, no return will be accepted.